Frequently Asked Questions
(Pricing)

Are TideSlides hard to install?
No, TideSlides are relatively easy to install. The units are either lag bolted or thru bolted to the side of your pole or piling. The side mounting makes for easier access and, in most cases, TideSlides are easier to mount than a conventional cleat and 10 times stronger.

Will this work on my dock?
TideSlides will work on virtually any dock. From side tie-ups using only two units on one side, to three point tying, all four corners, and more. We will assist you in determining the best positioning for the most benefit. TideSlides are the most flexible and easy to use dedicated mooring system available.

What are TideSlides made of?
TideSlides are constructed of the finest materials available, solid 316L stainless steel and 100% UV stabilized Polymer plastics. We even go as far as machining the mooring blocks from solid pieces of UHMW, not injection molding for even greater strength! TideSlides are made to stand up to years of hard use.

Where do I mount TideSlides on my dock?
TideSlides are mounted on the "side" of the dock pole, out of the mooring area. To the left, is shown an example of how the unit is mounted. This eliminates the chance of bumping into it while docking and does not take up space in the slip. Because TideSlides rotate on the solid 316 SS shaft, you can use them for different boats in the same slip, too. Don't forget! because you don't have slack lines its easier than ever to tie up!

Are TideSlides strong enough to hold my boat?
TideSlides are the strongest system available and are offered in a wide variety of duty ratings to accommodate any size boats. From our Heavy Duty Class for boats to 30 feet and 12000# with a solid 1" diameter 316 stainless steel shaft to the Heavy Yacht Class with a 2" solid 316 SS shaft for yachts to 125000# and up. TideSlides are offered in shaft diameters from 1" to 6" for any size watercraft.

How long should by TideSlides be?
TideSlides are offered in standard lengths from 4 to 20 feet long and custom lengths are always available. Keep the following keys in mind while determining TideSlide length.

First: What is the average tidal movement in my area?

Second: What are the tidal extremes we typically experience?

Based on these two basic rules of thumb, we can estimate a reasonable average length for your application.

Example: Your average tidal flow is 3 feet, but on full moon and other extreme days you experience 1.5 foot negative and 1 foot positive tide. In this case, we would recommend a 5-7 foot long TideSlide.

How many TideSlides do I need for my boat?
TideSlides are available in many standard duty ratings and other custom ratings are available:
Please note that the duty ratings are for individual units and the use of more than one unit increases the rating for each additional unit employed. Example: 4 Heavy Duty 1" TideSlides will secure a vessel up to 34,000 lbs. or 30 feet long. (6) Heavy Duty Units will moor a yacht up to 50,000 lbs. *

*TS Series- Heavy Duty Class (1" SS shaft) Each unit is duty rated to #12,000
Ideal for any size up to 30+ foot boats & yachts!
Example: 4 units for boats to 12,000#

*YS Series-Yacht Class (1 1/2" solid SS shaft) duty rated to #50,000 each
Ideal for 30 to 55+ foot yachts!
Example: 4 units for boats to 50,000#

*HY Series-Heavy Yacht Class (2" solid SS shaft) rated to #125,000 each
Perfect for 50-90 foot yachts!
Example: 4 units for yachts to #125,000

*MY Series-Mega Yacht Class (2 1/2" solid SS Shaft) rated to #250,000 each
Ideal for 80-140 foot yachts!

* Length of slide and mounting conditions may limit actual load/weights. Conditions may also limit weights and should always be considered. Exposure and traffic must be accounted for when determining Series and length. If you are unsure of what series and how many units you need, please call us at 1-800-481-8440.  

Does each TideSlide Kit include the mounting Hardware & Rope?
All TideSlides are shipped with 1/2" x 6" stainless steel lag bolts unless otherwise requested. Thru bolts are available (at an additional cost) upon request and are recommended on highly exposed areas and/or weak pilings. Different types, sizes and lengths of rope are needed for every installation, so rope is not included. Ropes can be purchased through your favorite boating supply store, or we can custom order ropes for you. Let us know what type, size, and length of rope you need and we'll be happy to provide you with a quote.

What type of warranty does TideSlide Offer?
TideSlide Mooring Products feature a 100% warranty on workmanship and defects on all parts manufactured by the principle for a period of three (3) years from the date of purchase. TideSlide Products cannot be held responsible or liable for damages sustained from storms, acts of God, acts of terrorism and/or war.

Do you still have questions about TideSlides?
Call us at       1-800-481-8440      or local at         (941) 628-3336